Wednesday, November 4, 2009

The PDV6000 Plus for On-Site Analysis of Heavy Metals

The PDV6000 plus is the latest generation of portable instruments from MTI (UK) which provide excellent accuracy and convenience when performing on site heavy metal analysis in water or soil. Building upon the reputation of the PDV6000, which is globally accepted as the benchmark system, the PDV6000 plus boasts a range of software and hardware improvements. It further improves data quality by lowering detection limits, improving reproducibility, providing extra resolution of potential interferences and improved correlation with standard laboratory methods. Defensible real time decisions can therefore be made on site, reducing cost, whilst improving site characterisations.
Keeping a large number of the features and accessories that made the PDV6000 so successful, the PDV6000plus is taking on site metal monitoring to next level

Laboratory Disk Mill "Pulverisette 13"

Fritsch's (Germany) recommendation for all processing laboratories with a continuous delivery of dried soil samples, sewage sludge, hydrological sediments, drilling cores for batch or continuous fine grinding. The maximum feed particles size is approx. 20 mm edge lenght. The fineness attainable (d50) is down to approx. 12 mm (largest gap width) or 0.1 mm (smallest gap width). The maximum throughput of 150kg/h depends on the gap setting and the hardness of the sample. The relatively large throughput enables it to be used in the pilot scale or in the small size production, for example : slag-disintegration for the reclamation of precious metals.
The material to be ground is crushed between two counteracting grinding disks with course radial toothing on the inside as a result of compressive and shearing stresses. The staged toothing means that the material is preground in the inner chamber of the grinding disks before being finely ground in the outer chamber. The gap width between the two grinding disks is set from the outside - also during operation - and determines the fineness of the end product.

Monday, November 2, 2009

The SenSafeT Free Chlorine Water Check Regulatory Drinking Water

Municipal Drinking water treatment plants now have a rapid (40 seconds), accurate, and low-cost option for regulatory drinking water compliance monitoring without the worries of indicator "bleach-out" or monochloramine interferences. The SenSafeT free chlorine water check is now U.S. EPA APPROVED. This test available for compliance testing as describe in the United State Federal Register. SenSafeT free chlorine water check can now be treated as an equivalent to other free chlorine test kits. In the original recommendation letter from U.S. EPA it was stated : "We (EPA) believe that the ITS test strips will provide the regulatory community with a valuable option for monitoring free chlorine levels in drinking water.
As an alternative to DPD, SenSafeT free chlorine test strips avoid the errors inherent to currently available test methods. no powder, tablets, liquids, instruments, technical training, or MSDS is required. And, since the test strips are non-hazardous normal waste disposal may be used. All of these factors make SenSafeT free chlorine water check the safe, accurate, easy, and affordable water testing solution

SITRANS FUP1010 Weatherproof Portable Flowmeter

SITRANS FUP1010 Portable Clamp-on Hybrid Flowmeter, housed in a rugged watertight enclosure, utilities either Transmit-Time or Reflexor operation mode to allow operation on virtually all full pipe liquid applications. Pipe sizes range from 1/4 to 360 inches. Options include a pipe wall thickness gauge and single or dual channel or path operation. A large data logger provides long term storage of measured variables. Standard daata inputs/outputs are included and supported. This meter is ideal for almost all water and wastewater measurement applications, including potable water, chemicals, raw sewage, sludges, liquids with medium to heavy suspended solids or aeration and temporary measurements during storm events.

Sunday, November 1, 2009

The EC410 Oxygen Sensor

The latest addition to e2v's (UK) broad range of gas sensors. The EC410 is a RoHS complaint oxygen sensor that contains no lead, has a greatly increased life span and is significantly lower mass compared to other similar product. The EC410 Oxygen Sensor is the only RoHS compliant oxygen sensor available on the market today. It has a longer life expectancy than comparable lead based sensors, it is extremely light-weight with very low power consumption at a standard 4 series size. e2v also offers the option to personalise and brand.

The BM25 Tranportable Multi Gas Area Monitor

Industrial Scientific Corporation (USA) have announced that is has launched the BM25 Multiguard transportable multi-gas area monitor. Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 Multiguard packs the benefits of a fixed-system area monitor into an easily transpotable, yet rugged instrument. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls and mobile or short-term work in areas where fixed detection systems are not suitable.
There are 17 interchangeable "smart" sensor options available for the BM25, making the system easily adaptable to a variety of applications and industries. When the BM25 detects a hazardouz level of oxygen, toxic or combustible gas, the top-mounted beacon sends a flashing, bright signal in all directions while emitting a powerful, 103 dB siren alarm. Capable of monitoring up to five gases simultaneously, the BM25 can be used as a stand-alone monitor or wired so that alarm signals transfer from one unit to another. This setup can create a safety perimeter around a detected atmospheric hazard, or transmit a manually initiated emergency signal over a wide area.
The BM25 comes standard with a NiMH battery pack offering 100 hours of continuous run time. Long-term area monitoring is possible in hazardous locations with an intrinsically safe trickle charge power supply. Also standard are STEL and TWA readings and nearly four months of data logging capacity for a five gas configuration.

BM25 Multiguard Tranportable Multi Gas Area Monitor

Industrial Scientific Corporation (USA) have announced that is launched the BM25 Multiguard transportable multi-gas area monitor. Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 Multiguard packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls, and mobile or short-term work in areas where fixed detection systems are not suitable.
There are 17 interchangeable "smart" sensor available for the BM25, making the system easily adaptable to a variety of applications and industries. When the BM25 detects a hazardous level of oxygen, toxic or combustible gas, the top-mounted beacon sends a flashing, bright signal in all directions while emitting a powerful, 103 dB siren alarm. Capable of monitoring up to five gases simultaneously, the BM25 can be used as a stand alone monitor or wired so that alarm signals transfer from one unit to another. This setup can create a safety perimeter around a detected atmospheric hazard, or transmit a manually initiated emergency signal over a wide area.
The BM25 comes standard with a NiMH battery pack offering 100 hours of continuous run time. Long-term area monitoring is possible in hazardous locations with an intrinsically safe trickle charge power supply. Also standard are STEL and TWA readings and nearly four months of datalogging capacity for a five gas configuration

The PDV6000 Plus for On-Site Analysis of Heavy Metals

The PDV6000 plus is the latest generation of portable instruments from MTI (UK) which provide excellent accuracy and convenience when performing on site heavy metal analysis in water or soil. Building upon the reputation of the PDV6000, which is globally accepted as the benchmark system, the PDV6000 plus boasts a range of software and hardware improvements. It further improves data quality by lowering detection limits, improving reproducibility, providing extra resolution of potential interferences and improved correlation with standard laboratory methods. Defensible real time decisions can therefore be made on site, reducing cost, whilst improving site characterisations.
Keeping a large number of the features and accessories that made the PDV6000 so successful, the PDV6000plus is taking on site metal monitoring to next level

Laboratory Disk Mill "Pulverisette 13"

Fritsch's (Germany) recommendation for all processing laboratories with a continuous delivery of dried soil samples, sewage sludge, hydrological sediments, drilling cores for batch or continuous fine grinding. The maximum feed particles size is approx. 20 mm edge lenght. The fineness attainable (d50) is down to approx. 12 mm (largest gap width) or 0.1 mm (smallest gap width). The maximum throughput of 150kg/h depends on the gap setting and the hardness of the sample. The relatively large throughput enables it to be used in the pilot scale or in the small size production, for example : slag-disintegration for the reclamation of precious metals.
The material to be ground is crushed between two counteracting grinding disks with course radial toothing on the inside as a result of compressive and shearing stresses. The staged toothing means that the material is preground in the inner chamber of the grinding disks before being finely ground in the outer chamber. The gap width between the two grinding disks is set from the outside - also during operation - and determines the fineness of the end product.

The SenSafeT Free Chlorine Water Check Regulatory Drinking Water

Municipal Drinking water treatment plants now have a rapid (40 seconds), accurate, and low-cost option for regulatory drinking water compliance monitoring without the worries of indicator "bleach-out" or monochloramine interferences. The SenSafeT free chlorine water check is now U.S. EPA APPROVED. This test available for compliance testing as describe in the United State Federal Register. SenSafeT free chlorine water check can now be treated as an equivalent to other free chlorine test kits. In the original recommendation letter from U.S. EPA it was stated : "We (EPA) believe that the ITS test strips will provide the regulatory community with a valuable option for monitoring free chlorine levels in drinking water.
As an alternative to DPD, SenSafeT free chlorine test strips avoid the errors inherent to currently available test methods. no powder, tablets, liquids, instruments, technical training, or MSDS is required. And, since the test strips are non-hazardous normal waste disposal may be used. All of these factors make SenSafeT free chlorine water check the safe, accurate, easy, and affordable water testing solution

SITRANS FUP1010 Weatherproof Portable Flowmeter

SITRANS FUP1010 Portable Clamp-on Hybrid Flowmeter, housed in a rugged watertight enclosure, utilities either Transmit-Time or Reflexor operation mode to allow operation on virtually all full pipe liquid applications. Pipe sizes range from 1/4 to 360 inches. Options include a pipe wall thickness gauge and single or dual channel or path operation. A large data logger provides long term storage of measured variables. Standard daata inputs/outputs are included and supported. This meter is ideal for almost all water and wastewater measurement applications, including potable water, chemicals, raw sewage, sludges, liquids with medium to heavy suspended solids or aeration and temporary measurements during storm events.

The EC410 Oxygen Sensor

The latest addition to e2v's (UK) broad range of gas sensors. The EC410 is a RoHS complaint oxygen sensor that contains no lead, has a greatly increased life span and is significantly lower mass compared to other similar product. The EC410 Oxygen Sensor is the only RoHS compliant oxygen sensor available on the market today. It has a longer life expectancy than comparable lead based sensors, it is extremely light-weight with very low power consumption at a standard 4 series size. e2v also offers the option to personalise and brand.

The BM25 Tranportable Multi Gas Area Monitor

Industrial Scientific Corporation (USA) have announced that is has launched the BM25 Multiguard transportable multi-gas area monitor. Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 Multiguard packs the benefits of a fixed-system area monitor into an easily transpotable, yet rugged instrument. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls and mobile or short-term work in areas where fixed detection systems are not suitable.
There are 17 interchangeable "smart" sensor options available for the BM25, making the system easily adaptable to a variety of applications and industries. When the BM25 detects a hazardouz level of oxygen, toxic or combustible gas, the top-mounted beacon sends a flashing, bright signal in all directions while emitting a powerful, 103 dB siren alarm. Capable of monitoring up to five gases simultaneously, the BM25 can be used as a stand-alone monitor or wired so that alarm signals transfer from one unit to another. This setup can create a safety perimeter around a detected atmospheric hazard, or transmit a manually initiated emergency signal over a wide area.
The BM25 comes standard with a NiMH battery pack offering 100 hours of continuous run time. Long-term area monitoring is possible in hazardous locations with an intrinsically safe trickle charge power supply. Also standard are STEL and TWA readings and nearly four months of data logging capacity for a five gas configuration.

BM25 Multiguard Tranportable Multi Gas Area Monitor

Industrial Scientific Corporation (USA) have announced that is launched the BM25 Multiguard transportable multi-gas area monitor. Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 Multiguard packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls, and mobile or short-term work in areas where fixed detection systems are not suitable.
There are 17 interchangeable "smart" sensor available for the BM25, making the system easily adaptable to a variety of applications and industries. When the BM25 detects a hazardous level of oxygen, toxic or combustible gas, the top-mounted beacon sends a flashing, bright signal in all directions while emitting a powerful, 103 dB siren alarm. Capable of monitoring up to five gases simultaneously, the BM25 can be used as a stand alone monitor or wired so that alarm signals transfer from one unit to another. This setup can create a safety perimeter around a detected atmospheric hazard, or transmit a manually initiated emergency signal over a wide area.
The BM25 comes standard with a NiMH battery pack offering 100 hours of continuous run time. Long-term area monitoring is possible in hazardous locations with an intrinsically safe trickle charge power supply. Also standard are STEL and TWA readings and nearly four months of datalogging capacity for a five gas configuration